Cavity casting aluminum & Mold design with solidworks

سرفصل های دوره

Mold design with software Solidworks & Cavity casting aluminium with software Inspire Cast

1. How to create the cavity in different ways

1.1 image 6483441 (4).zip

1. Shortcut keyboard in solidworks.html

2. Making a simple part to continue how to make a cavity casting mold

3. How to make a Mold with Surface.

4. How to make mold tools with solidworks command

5. How to make a mold with Indent command.

6. How to make cavity in solidworks assembly.

7. How to make a Mold with combine.

2. How to modify a part and prepare it for designing a mold

1. Thickness analysis

2. Draft Analysis and change of slope angle.

3. Preparation of the part to proceed with the mold

3. Design & cavity casting process and simulation

1. The rules and basic knowledge of the cavity casting process

2. The design of the filling system, the gate and the feeder Video-1

3. The design of the filling system, the gate and the feeder Video-2

4. Basic information for aluminum simulation for cavity casting

5. First simulation with the Inspire Cast software

6. The second and third simulation with the Inspire Cast software

7. Filling Results

8. Solidification Results

4. Creating the mold with Solidworks software

1. Creating the mold with the Solidworks software

2. Placement of injection pins as well as shrinking of the aluminum

3. Creating pins that turn the plate back, linear and injection plate.

4. Completion of this Mold project

5. Mold guide pins and opening hole for set up mold

5. The file of the first project

1.1 the first project.zip

1.2 the first project.sldprt.zip

1. Project 1.html

6. Project 2

1. Basic knowledge of the part before starting the project

2. Shrinking the aluminum and planning how the aluminum will flow.

3. The design of the filling system, the gate and the feeder

4. Comparison of the aluminum flow results of the project with minor changes

5. Creating the mold with the Solidworks software pr-2

6. Pins that turn the plate back, linear, injection pins and injection plate V-1

7. Pins that turn the plate back, linear, injection pins and injection plate V-2

8. Checking that everything is properly with the mold and motion for this product

7. The file of the second project

1.1 pr-2.zip

1.2 pr-2.zip

1. Project 2.html

8. Project 3

1. Information about the third project

2. The design of the filling system, the gate and the feeder and analysis

3. Creating the mold for sand with the Solidworks software

4. Creating the mold with the Solidworks software

9. The file of the third project

1.1 pr-3.zip

1.2 pr-3.zip

1. Project 3.html

139,000 تومان

خرید اشتراک افزودن به سبد خرید

خرید دانلودی فوری

در این روش نیاز به افزودن محصول به سبد خرید و تکمیل اطلاعات نیست و شما پس از وارد کردن ایمیل خود و طی کردن مراحل پرداخت لینک های دریافت محصولات را در ایمیل خود دریافت خواهید کرد.

تولید کننده: Udemy-Training